Laboratory Environmental Ipx9 Rain Test Device Chamber/Water Spray Resistance Tester

Uses The main function of this device is to test the performance of the product during storage, transportation and use under high temperature, high pressure and rain climate. This device is mainly used for electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles. Under the climatic conditions of high temperature, high pressure and rain, the physical and other related properties of the product are tested under the conditions of simulating high temperature, high pressure, and rain. After the test, the performance of the product is judged by verification to meet the requirements for product design and improvement. , Verification and factory inspection. Meets the following execution criteria 1.IEC60529 2.GB4208 3.DIN40050-9 4.ISO20653 5.EN 60529 6.DIN 40050-9 protection level requirements

Studio size(customizable)	W1000 × H1000 × D1000mm
Dimensions(customizable)	W1450 × H1750 × D1500mm
Test time	30s (120 positions in 4 positions)
Water spray ring angle	0 °, 30 °, 60 °, 90 °
Number of water jets	4
Water spray temperature	Room temperature -85 ℃
Water spray distance	100mm ～ 200mm
Water spray pressure	8-10mpa
Speed of sample table	1 ～ 5r / min
Load capacity of sample platform	15kg
High temperature flow meter	Flow rate is 14 ～ 16 L / min
Spray water temperature	80 ℃ ± 5 ℃
Jet water pressure	80 ~ 100 bar (8000 ~ 10000kpa)
Water spray flow	14 ~ 16L / min
Water spray distance	10 ~ 15cm
Water spray angle and time	0 °, 30 °, 60 °, 90 °, water spray at each angle for 30 seconds
Turntable	300mm diameter