Good Quality Electrical Test – Spring Tension And Compression Testing Machine/Spring Tensile Compress Tester – Hongjin

Product Detail

Features 1. It can automatically measure the tension, pressure and elastic coefficient of the spring, and can measure four points at the same time; 2. Using touch screen operating system, the operation is simple and convenient; 3. The power division value can be freely set up to three decimal places of 0.001N. The displacement can reach 0.01MM; 4. With automatic and manual zero capture function. High-efficiency zero capture can be achieved, and the height can be automatically remembered when power is turned off; 5. The pressure test can realize the double test of the height method and the deformation method (pressure method: can realize the test spring The force corresponding to how long the compression remains. Deformation method: How much downward compression can be achieved after hitting the spring. two function can measure 4 points at the same time). 6. Preload and rigidity compensation correction can ensure the accuracy of the measured value; 7. Load sensor overload protection and emergency stop function; 8, with a micro-printer.

Control method	Full touch
Test load type	10kgf
Minimum display load	0.01g
Single bit	gf, kgf, lbf, N (can be switched at will)
Maximum test stroke	200mm
Minimum display stroke	0.01mm
Testing speed	0-300mm/min
Standard pressure plate diameter	∮60 mm
Machine size	W420D650H700mm
Machine weight	50kg
Power supply	220V