It is used to measure the MFR value of the melt flow rate of various plastics and resins when they pass a certain temperature and load in a viscous flow state, and pass through a standard die every 10 minutes. Plastic, nylon and other engineering plastics, also suitable for polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyoxymethylene (POM), polycarbonate (PC) resin and other low melting temperature It is widely used in plastic production, plastic products, petrochemical and other industries as well as related institutions, scientific research units and commodity inspection departments.
| Temperature fluctuation |
±0.2℃ |
| Temperature uniformity |
±1℃ |
| Temperature display resolution |
0.1℃ |
| Time display resolution |
0.1S |
| Displacement accuracy |
0.001mm |
| Volume timer |
0.001S |
| Test result range |
50-5000cm³/10min |
| Barrel diameter |
Φ2.095±0.005mm |
| Outlet length |
8.000±0.025mm |
| Charging barrel diameter |
Φ9.550±0.025mm |
| Weight accuracy |
±0.5% |
| Output method |
Miniature automatic printout |
| Cutting method |
Manual automatic cutting |
| Test load |
Full set of eight weights |
| Voltage |
AC220V±10% 50HZ |
