Test items: |
|
|
output test |
1. Connect D+ and D- to the voltmeter, and the microphone head is triggered to work when the airflow rate is 14ml/s, and observe the voltage change on D+ |
|
Microphone detection |
2. The voltage on D+ will vary between 2.45-2.65V |
|
Suction resistance test |
1. Connect to the nebulizer (copying), the airflow rate is 14ml/s, and the suction resistance is tested. |
|
2. The suction resistance of 0.8-1.1Kpa is acceptable |
|
Protection test |
1. Add a load of 0.2Ω to both ends of D+ and D-, blow air to the microphone head to observe the status
indication of the light |
|
Overcurrent Short Circuit Test |
2. When blowing on the microphone, the red led flashes 3 times. |
|