Introduction:
Xenon lamp test chamber is best fit to mimic natural full sunlight spectrum xenon arc lamp to reproduce the destructive waves of light of different environment, which can be an excellent material for accelerated testing light fastness and weather resistance. Can be used for the screening of new material, improvement of existing materials or evaluate material such as the change of the composition change after durability test. Industry widely used, for example: paint ink, paint, resins, plastics, printing and packaging, adhesive, car motorcycle industry, cosmetics, metal, electronic, electroplating, medicine, etc.
Xenon Weather Conditions Meter is to test the product undergone illumination/rain/condensation/temperature/humidity/wind and any other climatic changes. This aging tester mainly for the test of non-ferrous/organic/rubber/plastic and building materials. It can provide data for user to evaluate the products' properties and performance in order to improve the product qualities.
Features
1. Full spectrum xenon lamp.
2. A variety of alternative filtration systems.
3. Water spray function.
4. Relative humidity control.
5. Test chamber air temperature control system.
6. Irregular shape flat product rack for easy product placement
7. The original imported Xenon arc lamp.
8. The installation is easy to use and basically does not require daily maintenance features.
9. The service life of the xenon arc tube depends on the level of irradiance used. The life of the lamp is generally 1600 hours. Lamp replacement is quick and easy, and long-lasting filters provide the protection needed to maintain the spectrum.
Structural characteristics
Imported intelligent temperature and humidity controller for temperature control, with PID adjustment, fast self-tuning, can set a variety of parameters, temperature direct digital display, reading is very convenient.
| Studio size W × D × H |
W1000×D1000×H800 mm |
| Appearance size W×D×H |
About 1550×1550×2250mm |
| temperature range: |
0°C～80°C |
| Temperature deviation: |
±2°C (without lighting) |
| Humidity range: |
20 to 98% R.H |
| Humidity deviation: |
±2.5%R.H (humidity ≥75%R.H) ±3%R.H (humidity ≤75%R.H) (without light) |
| Type of light source: |
Imported air-cooled full solar spectrum long arc xenon lamp (average service life of about 1600 hours) |
| Rainfall time: |
1 to 9999 minutes, adjustable |
| Rainfall period: |
1 to 9999 minutes, adjustable interval (off) |
| Spectral wavelength: |
290nm～800nm |
| Xenon lamp power: |
1 branch, 6000W (life: 1600 hours) |
| heating power: |
About 4KW |
| Humidification power: |
About 2KW |
| Source irradiance: |
200-1200W/M2 (at 200-800nm) adjustable
0.2-0.57 W/M2 (at 340nm) adjustable
0.4-1.22 W/M2 (at 420nm) adjustable |
| Distance from the center of the arc to the sample holder: |
350～380mm |
| Lighting time: |
Continuous programming |
| Blackboard temperature: |
0°C~110°C±3°C |
| Cooling method: |
Mechanical refrigeration air cooling |
| Total power and power: |
About 12KW; 380V±10% 50HZ The main technical parameters of the above products are measured at room temperature below 26 °C, relative humidity ≤ 85% R.H, and the temperature and humidity are constant for two hours after the studio is under no load. |
